T-Probe-20 ft-1 - Temperature Sensor with 20 foot cable T-Probe Don’t use a QWERTY keyboard

Don’t use a QWERTY keyboard layout

and a full spec sheet of the DS18B20 can be found in Appendix One of the T-Sense manual

The DS1923-F5# is calibrated against a NIST-traceable source for temperature

This results in controlled impedance to the bus

url: '/products/ds1925l-f5'

T-Probe-20 ft-1 - Temperature Sensor with 20 foot cable T-Probe Don’t use a QWERTY keyboardThis 20 ft temperature sensor cable works with all Link and LinkHub interfaces, as well as with AEM systems. The RJ 45 connector comes standard, but it can be removed and replaced with a different connection if needed. The T Probe can also be hard wired into the bus. Weight, power, RFI, etc. of the cable will determine the 1 Wire bus criteria. The lower third of the sensing unit itself is enclosed by our low pressure molding machine, using OM633 from