Pine Slivers Machine_FLIP 8-10 m per litre

8-10 m per litre

Can be used with the Lagler FLIP and ELAN edge Sanders or other sanding machines with similar size sanding plates

AAA battery compatible for up to 22 hours of connection (not included)

Wheel Setting Tool

transportable by 1 person

Pine Slivers Machine_FLIP 8-10 m per litreThese Pine Slivers are hand cut from reclaimed pine floorboards and pre cut into convenient tapered wedges. They are perfect for gap filling between pine floorboards. Directions Cut the sliver to the required length. Apply adhesive to each side of the sliver wedge. Hammer the sliver into the gap and wait for the glue to dry. Cut and sand down to blend with the surrounding floorboards. Each pack contains approximately 100 Slivers 1 metre in length