SL (Super Light) Flow Skid V2 for SCX24 & AX24 They are 4 full turns

They are 4 full turns in either directions on the tie rod ends for a few degrees of adjustment

*Does not work as steering servo

3D Print Weight - 3 grams

Servo cable comes out the bottom to not interfere with shocks

So if you want a full set you will need to order two sets of links

SL (Super Light) Flow Skid V2 for SCX24 & AX24 They are 4 full turnsThis front skid plate fits the Axial SCX24 & AX24 has been outfitted with a durable laser cut 1. 5 mm thick Delrin plate. Weighs 2 grams! This skid has a shallower angle to it of 53. 9 (from 90) and combined with the R. B. S. L. it gives the best glancing angle compared to stock configuration. Less hang ups, better lines. With having a flat face to it, the lowest 2 bolts for the diff cover are NOT used. Only the 4 bolts around the bearing are used.