SR20DET GTi-R RNN14 Solid Lifter Turbo 186-C 05503026 ARP Recommend pulling a bolt

ARP Recommend pulling a bolt to 75% of a yield in which case an ARP 2000 is around 110 foot pound in an M12 bolt which is fine but the 625 pulls 140 foot pound at 75% of yield and because you’re not tensioning the bolt to 140 foot pound both bolts perform exactly the sameIn this application spending the extra thousand dollars on the 625 bolts is a complete and utter waste of money and there is zero benefit

PLEASE NOTE

allows the use of large gauge without the bulk

Wastegate Position Sensor Version & Upgrade

Your buying PRP so you are buying confidence backed by hundreds of hours of design research and years of testing

SR20DET GTi-R RNN14 Solid Lifter Turbo 186-C 05503026 ARP Recommend pulling a bolt284 290 12. 50mm 12. 10mm Valve Lift 284 290 racing cams to suit well built competition engines with ported head and bigger valves. Turbo size 67mm+. Fuel type E85 or methanol. Kelford Cams recommend valve spring KVS22. \n \nProfiles can be used in RWD SR20DET engines with solid lifter conversion.